|
Post by danclift on Dec 15, 2015 14:15:17 GMT 1
|
|
|
Post by FredTransit on Dec 15, 2015 14:34:44 GMT 1
Nice one. Glad you have put up another thread for the van.
|
|
|
Post by danclift on Dec 15, 2015 14:48:10 GMT 1
Nice one. Glad you have put up another thread for the van. will have lot more pics to come after xmas ill have more money for parts so more pics and vids also i always get pics and vids of my projects heres a vid of the last project i did all this is 9 months its a long ish vid but shows what i can do and will be putting them skills into the transit which is the currant project oh and its all painted with rattle cans to
|
|
|
Post by danclift on Dec 17, 2015 19:11:47 GMT 1
|
|
|
Post by FredTransit on Dec 17, 2015 19:26:23 GMT 1
Yay! The windows have gone! You need the rest of the phase1 bits fitting now. I like it better as a van.
|
|
|
Post by danclift on Dec 17, 2015 19:39:56 GMT 1
Yay! The windows have gone! You need the rest of the phase1 bits fitting now. I like it better as a van. yea i like panel vans more plus its not a conversion either it started off as a panel van still looking for a vent tho.
|
|
|
Post by irishtransit on Dec 18, 2015 1:00:52 GMT 1
coming along nicely
|
|
|
Post by danclift on Dec 18, 2015 19:12:05 GMT 1
|
|
|
Post by Ralph on Dec 18, 2015 20:42:05 GMT 1
I have the proper van reinforcements for the inside if your interested. I can dig them out and get some photographs.
|
|
|
Post by dodgerover on Dec 18, 2015 22:03:21 GMT 1
|
|
|
Post by danclift on Dec 19, 2015 0:11:49 GMT 1
I have the proper van reinforcements for the inside if your interested. I can dig them out and get some photographs. if you have any pics
|
|
|
Post by danclift on Dec 19, 2015 0:14:49 GMT 1
|
|
|
Post by cadill69 on Dec 19, 2015 3:35:31 GMT 1
would be an interesting mod. Similar aye!
|
|
|
Post by FredTransit on Dec 19, 2015 15:36:18 GMT 1
As Ralph said you are missing a rib over the wheel arch. You don't need that many brace bits in the inside of panel. Or are they temporary? Loving the 'lend a hand' bracing to the wall!
|
|
|
Post by danclift on Dec 19, 2015 18:17:50 GMT 1
As Ralph said you are missing a rib over the wheel arch. You don't need that many brace bits in the inside of panel. Or are they temporary? Loving the 'lend a hand' bracing to the wall! am missing 3 ribs total. and i do need all those braces because without them the panel bows outwards so they keep the panel flat the wood was to hold the panel flat wile i weld the inside of the panel to the brace and wont see any of it once i get the van boarded out inside
|
|