|
Post by karl266 on May 14, 2014 19:27:32 GMT 1
|
|
|
Post by muttleymk2 on May 14, 2014 20:23:20 GMT 1
Get in there
|
|
|
Post by karl266 on May 14, 2014 20:26:36 GMT 1
lol made sure the shitty rot was out so as you can see i need a complete from a think am going to struggle on the wings thow
|
|
|
Post by muttleymk2 on May 14, 2014 20:51:59 GMT 1
Windscreen surround looks ok? Wings do come up now and then, not cheep though. I have front panel, grille, headlamps, bumper etc
|
|
|
Post by FredTransit on May 14, 2014 21:08:35 GMT 1
Believe it or not I dont remember seeing that! Thats some work. Best of luck!
|
|
|
Post by karl266 on May 14, 2014 21:10:43 GMT 1
Windscreen surround looks ok? Wings do come up now and then, not cheep though. I have front panel, grille, headlamps, bumper etc i was trying to save the wings but they had been put on that badly a just couldnt get them with out damaging them i need the full front as it never had one any way am buying new cross member,light panels,wings ive seen new for £285 on internet and am not paying that how much for the stuff you have mate pm well come yes the windscreen is solid but it needs replacing but already got a screen to replace the other as it has the dreaded marks from shit wiper blades
|
|
|
Post by dodgerover on May 14, 2014 23:54:02 GMT 1
I've got a n/s wing on my van that i'm replacing, if you can use it you are welcome to it, otherwise it will get used for patching, its ok apart from on the top edge in the middle where its been filled, plus tags will need welding back on that hold the indicator in place.
What about the fibreglass wings you were having done Fred?
|
|
|
Post by karl266 on May 15, 2014 7:55:17 GMT 1
seems panels for these are rarer then ya think
i can get the steps,sills but no light panels or front crossmember
i seen one in a scrap yard being used as a tyre store so am going to look at that see what panel's i can cut off it
|
|
|
Post by muttleymk2 on May 15, 2014 10:24:13 GMT 1
Cross member can be fabricated, there was a pair of light panels on EBay recently
|
|
|
Post by irishtransit on May 15, 2014 12:15:09 GMT 1
she does look quite solid so that's a start.it's a pity panels are so hard to get these days.
|
|
|
Post by karl266 on May 15, 2014 16:55:10 GMT 1
this took me all day to do cut the shite out and replace i had to leave so just for shape from this
to this
|
|
|
Post by irishtransit on May 15, 2014 17:19:44 GMT 1
ya not hanging around are ya!!looks a good start.
|
|
|
Post by karl266 on May 15, 2014 17:31:20 GMT 1
ya not hanging around are ya!!looks a good start. seen as work is quite a thought a make a start and weather is great so y not stocked up on welding wire cutting /grinding discs the down side is am gas-less welding as i carnt get me hand on a bottle off gas,well a can but they want a bottle in return for it so am on core flux wire at the minute
|
|
|
Post by RDTranny on May 15, 2014 21:01:07 GMT 1
Nice project there. Looks like you'll be kept busy enough with it! Will be keeping an eye on this thead.
|
|
|
Post by muttleymk2 on May 15, 2014 21:32:11 GMT 1
Way to go matey, welding already, looks good for gasless
|
|