|
Post by brownysmk2 on Feb 11, 2013 21:38:53 GMT 1
had a good day yesterday with my favourite tool, me air saw ;D chop chop dont think i'll be havin a heater and it looks like ive got to chop the sump and the crossmember aswell cos the engine is sittin too high in the bay
|
|
|
Post by FredTransit on Feb 11, 2013 22:51:48 GMT 1
heaters are for wimps......
|
|
|
Post by mrgrimly on Feb 12, 2013 21:03:26 GMT 1
Just drive it in the summer don't need a heater
|
|
|
Post by brownysmk2 on Feb 16, 2013 22:56:54 GMT 1
been doin a bit more today, dropped the sump off and chopped a piece out of the crossmember to see if we can get it down in the bay, which we did, but now its fouling the steering with the exhaust manifolds so need to look for rear exit rather than the center exit ones i have but now its in (sort of) looks like i might get to keep the heater after all ;D
|
|
|
Post by brownysmk2 on Feb 17, 2013 22:16:03 GMT 1
done some more today, but feel im gettin nowhere removed the inlet with the su's on to get a straight edge across the top to get it sittin level side to side, then thought id try me other inlet on much better lookin than the su's ;D
|
|
|
Post by mrgrimly on Feb 18, 2013 20:21:45 GMT 1
Looking good Mr B. Nice V8 rumble be better than pinto rattle lol
|
|
|
Post by brownysmk2 on Feb 10, 2016 22:52:24 GMT 1
so jonochap asked to see the willys im building, so I thought id stick it on here hoping to fire the motor on sunday, i'll keep you all posted if its ok with fred ?
|
|
|
Post by bullsintransit on Feb 10, 2016 23:17:38 GMT 1
Love this eras looks,used to own a 39 Dodge business coupe,but there's nothing more classic hot rod than a Willys Gassser!
|
|
|
Post by FredTransit on Feb 10, 2016 23:27:44 GMT 1
so jonochap asked to see the willys im building, so I thought id stick it on here hoping to fire the motor on sunday, i'll keep you all posted if its ok with fred ? A new thread would be nice mate!
|
|
|
Post by muttleymk2 on Feb 11, 2016 15:41:00 GMT 1
Bang up a thread on "other vehicles" we all want to see
|
|
|
Post by irishtransit on Feb 11, 2016 19:35:41 GMT 1
some nice work ya doing
|
|