|
Post by Ralph on Feb 19, 2015 21:47:21 GMT 1
I have been offered a twin wheel MK2 van cherry picker for spares. I will strip it in situ as its about 150 miles so too expensive to transport, in about 3-4 weeks time. Let me know what you need. The bodies pretty rough with 2 litre pinto. Ralph
|
|
|
Post by dodgerover on Feb 19, 2015 21:54:58 GMT 1
Hi Ralph, has it got an o/d box? Whereabouts is it roughly as it might be easier to pick up from where it is if possible while you are pulling it apart
|
|
|
Post by Ralph on Feb 19, 2015 22:09:54 GMT 1
I don't think it has, it was very difficult to get to so they are going to drag it out before I get there. It is near Portsmouth.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 19, 2015 22:27:04 GMT 1
Glove box retaining latch ( bit that screws to dash) Driver seat plastic cowling Front spoiler bib lol Please
|
|
|
Post by dodgerover on Feb 19, 2015 23:04:28 GMT 1
I don't think it has, it was very difficult to get to so they are going to drag it out before I get there. It is near Portsmouth. Oh well, never mind, if it turns out it does can you let me know - it would be easier for me to get to Portsmouth than round to Essex for pick up. Thanks Giles
|
|
|
Post by troppo on Mar 4, 2015 9:44:36 GMT 1
I`ll take any of the rubber bits under the bonnet (bar the hoses)the grommets in the firewall, the ring on the bonnet stay, radiator mounts, if they are any good.
|
|
|
Post by Ralph on Mar 4, 2015 19:18:53 GMT 1
Ok, i will save them for you. Ralph
|
|
|
Post by mrgrimly on Mar 5, 2015 22:20:00 GMT 1
Pm sent
|
|
|
Post by Ralph on Mar 5, 2015 23:21:13 GMT 1
I have 3 more to look at next week plus loads of parts. Ralph.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 6, 2015 0:02:19 GMT 1
Did you save any of the bits I needed? Thanks.
|
|
|
Post by Ralph on Mar 6, 2015 7:44:53 GMT 1
I havn't stripped it yet.
|
|
|
Post by troppo on Mar 8, 2015 1:58:42 GMT 1
Dont want to rush you but any news yet Ralph?
|
|
|
Post by Ralph on Mar 8, 2015 20:08:03 GMT 1
No i havn't, i will hopefully strip it in a couple of weeks as i have 3 more vans and a load of parts to clear before the council scrap them in 2 weeks.
|
|
|
Post by dodgerover on Mar 9, 2015 1:15:59 GMT 1
Keep me in mind if there's an o/d box and the rest of the bits to go with it for a conversion into a LWB on one of the other 3 please.
|
|
|
Post by irishtransit on Mar 9, 2015 17:35:09 GMT 1
How do you manage to find these beauties? Any pics of them?
|
|