|
Post by sleepy on Nov 1, 2015 7:39:44 GMT 1
Yes... very interesting project please keep us updated with your progress. Good luck
|
|
|
Post by harry2012 on Nov 2, 2015 19:30:04 GMT 1
That looks an awesome project!
|
|
|
Post by PAUL DRIVER 79 on Nov 3, 2015 0:10:14 GMT 1
Cheers for the comments guys,
Hopefully going to start stripping it this week so a few bits will be for sale in the next few days, ill put them in the for sale section, but if anybody needs...
twin wheel rear axle with leaf springs ideal for single to twin wheel conversion on a camper etc..
front axle RHD minus steering box ideal for LHD conversion parts.
2.0 pinto engine/box that has done just over 100k.
6x wheels.
propshaft.
Let me know as i wont be keeping these long.
Paul.
|
|
|
Post by harry2012 on Nov 3, 2015 8:09:22 GMT 1
Do you know which ratio the rear axle is?
|
|
|
Post by PAUL DRIVER 79 on Nov 3, 2015 9:30:52 GMT 1
Im not sure exactly, ill have to check when i remove it ?
If i remember right it drove ok and wasnt revving at low speeds,
But ill confirm this in a few days.
|
|
|
Post by harry2012 on Nov 3, 2015 12:55:18 GMT 1
Ok, if it's. 4.63 I'll be very interested.
|
|
|
Post by PAUL DRIVER 79 on Nov 7, 2015 22:34:40 GMT 1
Took the jaguar xjr shell to weigh in, and got a measly £24 for my trouble.
|
|
|
Post by muttleymk2 on Nov 7, 2015 23:11:46 GMT 1
Scrap is cack at the moment, last thing I weighed in was 1500kg, plus 2 ally wheels, got £35
|
|
|
Post by cadill69 on Nov 8, 2015 6:05:40 GMT 1
Makes sense. There is a glut of iron ore at present with prices half what they were 5 years ago. Tis why aussie economy is tanking.
|
|
|
Post by cadill69 on Nov 25, 2015 0:44:59 GMT 1
Have you finished yet?
|
|
|
Post by PAUL DRIVER 79 on Nov 25, 2015 21:26:32 GMT 1
No mate, just waiting to get a wagon out of my mates unit, then full steam ahead, Ive been arranging to have the engine wired up and find out exactly what i need to get the motor running, An aluminium custom tank, housing twin fuel pumps will be used, Its got 4 channel VVT and variable intake so needs a decent ecu to run it, Im going to use the fly by wire accelerator from a mk5 or 6, Ill probably use the clutch and brake pedal also as im converting it to hydraulic, some more pictures soon
|
|
|
Post by PAUL DRIVER 79 on Dec 18, 2015 17:17:43 GMT 1
Just going to put some more pics of the strip down in the "chassis cab" section
hope you like them !
|
|