|
Post by danclift on Aug 2, 2016 0:28:03 GMT 1
|
|
|
Post by FredTransit on Aug 2, 2016 14:40:29 GMT 1
Nearly all olympic blue now!
|
|
|
Post by sleepy on Aug 2, 2016 19:37:04 GMT 1
Looking good
|
|
|
Post by danclift on Aug 3, 2016 20:05:36 GMT 1
|
|
|
Post by sleepy on Aug 3, 2016 20:43:32 GMT 1
How many rattle cans have you used so far
|
|
|
Post by danclift on Aug 4, 2016 13:17:39 GMT 1
3 cans to do 1 door at £15 per can they mix il wile i wait
|
|
|
Post by danclift on Aug 4, 2016 13:18:01 GMT 1
|
|
|
Post by sleepy on Aug 4, 2016 16:29:47 GMT 1
So at a rough guess about 45-50 cans for the whole van
|
|
|
Post by bullsintransit on Aug 4, 2016 16:37:14 GMT 1
Wow,30 cans is £450, thats a lot for top coat materials.Finish your getting looks good In pics Dan.
|
|
|
Post by danclift on Aug 4, 2016 22:19:11 GMT 1
|
|
|
Post by danclift on Aug 5, 2016 13:14:17 GMT 1
just standing on my drive with a angle grinder and flap disc stripping the whole door down to the steel once this is stripped ill be doing the side of van lots of grinding here today
|
|
|
Post by dodgerover on Aug 5, 2016 22:20:33 GMT 1
Wow,30 cans is £450, thats a lot for top coat materials.Finish your getting looks good In pics Dan. %^&*! how much? Seriously you could have bought a decent used Devilbis spray gun, a cheap gun for primer, a compressor, airline regulator + water trap & an air fed mask then all the materials and still had cash left!
|
|
|
Post by danclift on Aug 6, 2016 10:47:51 GMT 1
yea but im just buying couple cans every few weeks anyway thats a lot of effort setting it all up to paint 1 door then cleaning it all after im just painting 1 panel at a time
|
|
|
Post by danclift on Aug 6, 2016 10:48:22 GMT 1
|
|
|
Post by danclift on Aug 6, 2016 16:26:25 GMT 1
|
|