Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 4, 2014 22:09:33 GMT 1
Hi all need a towbar for my tipper.
Have seen a few mk3/4 ones on eBay but unsure if they fit a mk2.
If I had too I could modify/fabricate a later one to fit but I'd rather just buy one that's a simple bolt up job.
Thanks
|
|
|
Post by muttleymk2 on Feb 4, 2014 22:34:19 GMT 1
Mk 3 will fit if its for chassis cab.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 4, 2014 23:00:32 GMT 1
Mk 3 will fit if its for chassis cab. Thanks
|
|
|
Post by FredTransit on Feb 5, 2014 10:25:29 GMT 1
bare in mind the travel of the body when fitting a tow bar to a tipper. Its what stopped us fitting one to ours.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 5, 2014 17:00:22 GMT 1
bare in mind the travel of the body when fitting a tow bar to a tipper. Its what stopped us fitting one to ours. Arr yes the curse of the V shaped tailgate crease. Luckily my bed overhangs a good foot past the crossmember so I think it would be ok.
|
|